|
 |
||||||||||||||
|
 |
TYPE:
Motor Yacht - Hybrid Catamaran
LENGTH:
65 ft 6 in/20 00 meters
BUILDER:
Intertech Marine
BEAM:
45 ft 4 in/13,84 meters
YEAR:
1999
DRAUGHT:
3 ft 9 in / 1.10 meters
CONSTRUCTION:
FRP Composite
GENERATORS:
2 x Northern Lights 50 kw
ENGINES:
2 x 600 BHP D.D.
WATER TANKS:
2 x 280 US gallons
FUEL TANKS:
2 x 2650 US gallons
SOLAR ENERGY SYSTEMS:
10.2 kilowatts
PROPULSION:
2 x Hamilton Water jets
DISPLACEMENT:
76,000 kgs
SPEED:
20 to 25 knots
GUESTS:
10
CREW:
4
The Master stateroom, which occupies one half of a hull, is accessible from the marina deck, through a double glass door entrance. The step up sleeping area has a king-size bed, a 10 ft/3 m closet, a writing desk and comfortable seating area The lower area has a jacuzzi, a seating bench, a vanity unit and also a separate washroom. The four guest staterooms have their own bathrooms and a queen-size bed. Each stateroom has a writing desk, a 5 ft/1.5 meters closet and a seating bench, as well as individually controlled built-in TV and stereo systems and on board communications
The ARC 2000 Yacht is a revolutionary design. The usable space on the yacht is double that of a conventional yacht of similar size. There is garage for a large amount of water sports equipment, even a four-wheel drive vehicle. With its detachable marina located under the central body section, a protected swimming platform with extended marina facilities can be created. The generous interior leaves ample space for 10 guests, and the retractable panel system offers a large and versatile open deck option. The different
propulsion options enable speeds from 20 to 50 knots and the flexibility to customize each yacht to the owner's requirements. The different energy recovery systems will not only reduce running costs considerably but also guarantee that the ARC 2000 will be at the forefront of modern yachting technology for years to come.
| LOCATION: Halifax | BASE PRICE: call |
Details are believed to be correct but are not guaranteed. This is not a contractual document
This 20 meter Motor Yacht is a hybrid catamaran with a multi chine planing hull form. The design combines low and high speed characteristics of wave piercing yachts with the advantages of a planing yacht. This makes for very efficient and comfortable passages. The yacht will be built of FRP composite construction and designed to ABS rules.
These will be prepared by Advanced Design & Technology (ADT). The delivery of the plans will be approximately 4 months. The construction period will be between 12 to 16 months, depending on the complexity of the interior outfitting.
The yacht will be built under a permanent roof facility with temperature and humidity control. The workspace will be suitable for FRP composite construction and will have facilities for interior component construction; in addition to equipment installation.
All machinery and equipment will be installed and tested prior to delivery. Sea trials will be conducted to insure all machinery and equipment is fully operational. Sea trials will include machinery run-ups and trials as well as associated machinery operational tests of the yacht.
The yacht's hull and superstructure will be built of one off FRP composite construction to the American Bureau of Shipping (ABS) rules. The yacht will have specifically designed and engineered FRP lay-ups of vacuum bag epoxy resin, E Glass Cloths, S Glass Cloths and Keviar / Carbon Directional Fibers with varying thickness and densities of end grain balsa and high density structural foam core. The superstructure will have the core comprising of high-density structural foam core and honeycomb core for reduction in weight. The bulkheads will generally be constructed of high-density structural foam core in the hull and machinery decks. The bulkheads will be in honeycomb in the hull and guest decks. The overall structure will be supported by a combination of watertight bulkheads, ring Irames, longitudinal stiffeners and collisions bulkheads; all according to the ABS rules. The machinery beds will be integrated into the structure. The design of the structure will minimize weight while maximizing the strength of the yacht.
Lightweight FRP composites using honeycomb sandwich panels and other light weight materials, as required, Edge trim, surface coverings will be used with regard to weight and styling.
| Bulkheads | Varnished or fabric covered |
| Ceilings | Composite construction, covered with vinyl or equal |
| Stairs | Composite construction covered with Marindeck 2000 or equal |
| Floors Staterooms and reception areas | Carpets or equivalent |
| Floors Navigation / Bridge | Covered with Marindeck 2000 or equal |
| Floors bathrooms | Covered with Marindeck 2000 or equal |
(7.6 m x 3.35 m/25 ft x II ft) This large stateroom occupies one half of a hull. The entrance to the stateroom is through double glass doors, giving a clear view to the marina deck and creating a private balcony. The interior of the master stateroom encompasses a step-up sleeping area with a king-size bed, with windows to both sides of the hull and mirrored ceiling above the bed section, a 3 m/ 10 ft long closet, a writing desk and seating unit. The lower area is separated by a modern sculpture, which also functions as a faucet for the jacuzzi bath, and a separate washroom; on the other side there is a vanity unit, and seating bench.
All guest staterooms have queen-size beds and their own bathrooms consisting of a sink and a combined toilet / shower unit. Each stateroom has a writing desk, approximately 1.5m/5ft of closet space and a seating bench.
One crew cabin in each hull. Both have their own bathroom , a writing desk and approximately 1.2 m/4 ft of closet space.
The beds can be arranged in a vertical or horizontal configuration, thus giving the option of a queen-size bed for crew couples (Each crew cabin sleeps 2)
This area offers a very large space for less formal activities. In an "Open Deck" mode, where the side and roof panels are retracted, this is a perfect place for sun bathing and outdoor dining. With a 3.60 m sq/39 ft sq, Roman type whirlpool (See options package) this becomes the focal point of the vessel's aft section. The whirlpool has a waterfall, strong under water massage jets and adjustable central water propulsion system for resistance swimming. It also has retractable jets, which can be used as a decorative fountain. The back section of the whirlpool wall consists of four glass panels, which can slide to each side into each side of the wall, thus integrating this area into the main deck.
The dining area seats 10 guests and has a central glass display unit that can be used as a side table. The extendable dining table and 10 chairs are built of composite material. Surfacing by owner's choice from provided samples.
This area can be used for gym, library or a den. Additional furnishings and / or equipment at owner's expense.
The Deck bar seats 8 guests, it can be integrated or separated from the galley area and is built of composite materials / surfaced with owners choice of material from supplied samples. It is equipped with under counter duller, freezer, bar sink, glass steam cleaning unit. The backing unit encompasses a drink display wall cabinet. There is also access to the lower storage space.
This has a full length counter space built of composite materials / surfaced with owner's choice of materials from supplied samples, a multi functional range and oven as well as a freezer and chilled storage. For more informal use the galley can be connected to the central bar area by opening the folding doors on both sides of the center unit.
The navigation bridge / wheelhouse will be equipped for the normal operation of the yacht. Three helm seats are provided. Control of the steering will be by joystick, located in the armrest of the center helmsman's seat.
Bridge features:
Has a round U-shaped writing desk, with built-in compartments, one chair, a computer terminal and communication equipment. The space can have either a second 1/4 round desk or a 1/4 round seating unit. All materials made of composite and non-allergic foam type with surfacing by owner's choice from supplied samples.
It is positioned one step up from the main deck level and seats nine (9) guests. A unit behind the sofa is suspended from the ceiling; it includes a large 1.5 m/ 3 ft, retractable screen for TV and VCR viewing (rear projection type) as well as clear glass display shelving. The unit directly below serves as storage for the salon equipment and display material. All materials are composite and non-allergic foam types with surfacing by owner's choice from supplied samples.
Accessible from the main deck when the yachts roof panels are retracted. The deck incorporates two 1/4 round seating sections (seating 12), two sun bathing platforms, ( total area 4.8 m x 6 m/ 16 ft x 20 ft) and a 1/2 circular bar counter. Centrally located is the navigation counsel equipped with navigational and manoeuvering controls. All materials composite and non-allergic foam type with surfacing to the owner's choice from supphed samples. The Fly bridge controls will function as a slave to the master, based in Navigation / Wheelhouse.
Engine control and monitoring of rpm and temperature Joystick steering Intercom station Anchoring system controls
An area used for onboard storage. Directly accessible from the central bar / galley, the space contains one chilling, one freezing unit and compartments for dry food storage on one side and one chilling unit as well as shelving for bottles on the other side.
The other structural cavities of the lower part of the vessel's central section are filled with super buoyancy material, which also serves as sound and heat insulation. Additional storage and fuel tanks can be built into this area, at the owner's cost, yet at the loss of some super buoyancy material.
Each hull of the yacht will house the following:
Anchors, windlass, cleats and warps specifically designed for the ARC 2000 Electric windlass control located on bridge, also local control at fly bridge and bow area.
Constructed of lightweight FRP composite.
Strategic installations for freshwater, fuel oil, greywater and battery room.
The 4 cannister life rafts, are positioned on the sun deck in custom made cradles each can carry up to eight persons.
FRP Composite constrution
Retractable Central Hull Floating Marina: (6.0 m x 6.0 m/ 20 ft x 20 ft)
When retracted into the stowage compartment the marina folds to half of its size. The mechanics of this procedure are performed via combined electric / hydraulic mechanism. The floating marina has several different designs for the owner to choose from depending on his requirements.
Retractable Marina Stowage Compartment:
Contains mechanisms for the marina's lowering, retracting and locking operation.
Windows tinted, constructed from toughened glass, and with thickness according to ABS approved guidelines. Retractable roof panels are electrically operated and slide into the central roof section of the vessel. The vessels side and back panels slide away horizontally
Approved ABS, watertight design.
The fresh water system with 2 x 280 US gallon yacht tanks is linked to a R.O water maker system.
The Central-Vac unit is sound insulated and easily accessible for servicing; it is located in the lower section of one hull. Two outlets in each twin hull / four outlets on the main deck and one outlet on the top deck.
The propulsion system depends on the owner's budget and desired speed. (See propulsion package options)5.2 Auxiliary Generators:
Two Northern Lights 50 kw generator sets. Output from these generator sets will be used in the main electrical distribution center for battery charging and the onboard yacht's consumption.5.3 Solar Panel System:
The photovoltic solar panels, which form part of the vessels top layer membrane, are waterproof and have tough epoxy based non-skid surface coating. The panels are installed in large units and can be, if necessary, repaired or replaced. The calculated maximum generating capacity 10.2 kw5.4 Wind Turbine Station:
Calculated HP output at various wind velocities
| 10 Knots | 1.50 HP |
| 20 Knots | 11.00 HP |
| 30 Knots | 38.00 HP |
| 35 Knots | 60.00 HP |
The generation of wind energy power will increase when the vessel is cruising. It should be noted that energy can also be generated with side wind conditions.
The yacht will have specifically designed HVAC air-conditioning system utilizing the ARC 2000 technology to ensure climate control for the occupants.
Each of the machinery spaces, including the galley is fitted with automatic non-Halon system. Smoke detectors are fitted throughout the yacht. Manual fire extinguishers are fitted in all cabins and throughout the yacht.
A custom designed bilge system for the ARC 2000 yachts will be installed.
Sewage treatment facility with dedicated tankage for sewage and effluent.
The main electrical center is specifically designed for the ARC 2000 yachts, it will control and distribute power to the battery bank for the storage of excess power and an inverter system to change DC to AC and AC to DC, for use onboard.
Books & Manuals will be in English; they will cover all necessary instruction & data for the equipment on the yacht. Manufacturer manuals are supplied for other material supplied to the yacht.
All equipment, materials and construction, including integration of equipment will be covered by a one-year, (12) month's warranty. The warranty work will be done at INTERTECH MARINE LTD, or at an authorized service agent. The choice of location for warranty work will be the owner's choice and expense for transportation to that location will be at owner's expense.
The Builder, Intertech Marine Ltd warranties all composite construction for a period of two years against delamination. Inspection by Intertech Marine experts will be included and performed just prior to the two-year period.
Manufacturer warranties for equipment installed in the yacht, covering a period longer than 12 months will be passed on to the owner.
Advanced Design Technology Inc. Halifax N.S. Canada owns exclusive rights to the ARC 2000 concept, the ARC 2000 Mega Yacht Project and variations thereof as well as to the information as described in this specification. All drawings and related information can not be used, copied or duplicated for any other projects or purposes without a written permission of ADT Inc. Management. Copy right 1998 ADVANCED DESIGN & TECHNOLOGY INC.
Details are behoved to be correct but are not guaranteed. This is not a contractual document
| Includes | 2 x 600 BHP DD Propulsion drive 2 Water Jets Standard Control & Navigation package |
| Yacht Type | Propulsion Power | Water Jet | Cruise Speed | Top Speed | Price in USD |
| ARC 2000 / CRUISE | 2 x 600 BHP DD | 2 | 20 Knots | +25 Knots | (call) |
| ARC 2000 / SUPREME | 2 x 770 BHP / 2 x 600 BHP DD. | 4 | 25 Knots | +30 Knots | call |
| ARC 2000 / EXTREME | 2x2,100 BHP.DD. | 2 | 30 Knots | +40 Knots | call |
| ARC 2000 / RAM | 2 x 2,460 BHP DD. | 2 | 35 Knots | +45 Knots | call |
| ARC 2000 / BULLET* | 2 x 4000 SHP Gas Turbine | 2 | 45 Knots | +50Knots | call |
Notes: *
The size of these engines will reduce the guest accommodation (modified layout will be sent on request) The water sports and land exploration equipment and any other modifications requested by the Owner, will be quoted prior to contract.
If another engine option is required - deduct the cost of the ARC 2000 / CRUISE 600 BHP DD engines ($ 450,000) and add the cost of the other engines
| Electrical propulsion | Includes 2 x 500 BHP Electrical Motors, control package & Water Jet Drives | call |
| Roman spa whirlpool | Standard | call |
| Roman spa whirlpool | Deluxe | call |
| Central retractable marina | Standard | call |
| Central retractable marina | Deluxe | call |
Closed Twin Hull Option/Sleeps 10 + 4 Crew
Costs and their options in US Dollars (The total Price D is composed of A, B & C)
The above outlined prices are based on present Canadian dollar value on international market and can change prior to purchasing or signing of the contract. The price will include all items as outlined under the principal characteristics and principal features but will vary depending on the extend & complexity of the interior finishes. All ARC 2000 yacht & mega yacht prices, costs and dehvery times will be finalized with every individual chent at the time of purchase/ contract signing. Details are believed to be correct but are not guaranteed. This is not a contractual document
- Troy Marine <100ft - Troy Marine >100ft - ARC 2000 - ITM-Trawler -
- home - charter - contacts - press release - links -
